Micro-Flow G Series
Micro-Flow G series filter cartridges ultillize proprietary highly asymmetric polethersulfone membrane to deliver a combination of high flow rate and high dirt holding capacity.
MFN series filters are 100% pre-flushed with 18 megohm-cm DI water and integrity tested.
Each element is stamped with pore size, lot and serial number for identification and traceability.
Manufactured in a class 1,000 clean room.
RoHS, FDA, Halal Certificated
MFN series filters are 100% pre-flushed with 18 megohm-cm DI water and integrity tested.
Each element is stamped with pore size, lot and serial number for identification and traceability.
Manufactured in a class 1,000 clean room.
RoHS, FDA, Halal Certificated
Model :
MFNG
Materials of Construction
Filter Media: Highly Asymmetric Polyethersulfone Membrane
Hardware: Polypropylene
Sealing: Thermal Bond
Support Material: Polypropylene
Gaskets/ O-rings: Silicone, Buna-N, EPDM, Viton, Telfon Encapsulated Viton
Operating Conditions
Maximum Differential Pressure: 75 psid (5.1 bar) @ 68°F (20°C)
40 psid (2.8 bar) @ 150°F (65°C)
Maximum Operating Temperature: 180°F (82°C)
Recommended Change Out Differential Pressure: 35psid (2.4 bar)
RoHS, FDA, Halal Certificated
100% pre-flushed with 18 megohm-cm DI water and integrity tested
Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises.
Dimensions
Outside Diameter: 2.67" (68mm)
Lengths: 10", 20", 30", 40"
End Configuration
DOE =
Double open end
Code 3 = 222 / flat
Code 8 = 222 / Fin
Code 7 = 226 / Fin, Bayonet
Retention Ratings
0.01, 0.02 µm Absolute
