WF series filter cartridge
- Graded pore structure provides efficient removal of a wide range of particle sizes
- Wrapped center core helps to minimize fiber migration

・ Type: String Wound Filter
・ Material: PP / Cotton / Glass Fiber
・ Length: 10”~70”
・ Retention Rate: 0.5~100 μm
・ End cap and extended core configuration available

UPW-Flow series filter cartridges utilize proprietary highly asymmetric polyethersulfone membrane to deliver a combination of high flow rate and high dirt holding capacity.

Absolute rated at > 99.9% efficiency with retention.

Manufactured in a class 1,000 clean room.

RoHS, FDA, Halal Certificated

PRS series filter cartridge
With 3 layers graded pore structure for general particle reduction applications

・ Type: Melt Blown Depth Filter
・ Media: Polypropylene Resin
・ Length: 10”~50”
・ Retention Rate: 0.5~100 μm
・ End cap configuration available
・ RoHS, NSF42, NSF61, FDA, Halal Certificated

EXA series filter cartridge
With multiple layers and designed for high viscosity or removing gels from liquid

・ Type: Pleated Filter
・ Media: Polypropylene Melt Blown
・ Length: 10”~40”
・ Retention Rate: 1~40 μm (Absolute)
・ End cap configuration available
・ RoHS, NSF42, NSF61, FDA, Halal Certificated

Carbon-Clean-B series filter cartridge
Activated carbon in rigid structure provides better strength and longer usage

・ Type: Activated Carbon Filter
・ Media: Bonded porous activated carbon with polypropylene binders
・ Length: 10”~40”
・ Retention Rate: 5 μm
・ Double Open End
・ RoHS, NSF42, NSF61, FDA, Halal Certificated

Micro-Flow G series filter cartridges ultillize proprietary highly asymmetric polethersulfone membrane to deliver a combination of high flow rate and high dirt holding capacity.

MFN series filters are 100% pre-flushed with 18 megohm-cm DI water and integrity tested.

Each element is stamped with pore size, lot and serial number for identification and traceability.

Manufactured in a class 1,000 clean room.

RoHS, FDA, Halal Certificated

Tech-Flow series filter cartridges are made of biologically inert and chemical resistant hydrophobic and hydrophilic PTFE media.

Each TEF filter element is stamped with pore size and lot number for indentification and traceability.

Absolute rated at > 99.99% efficiency with retention.

Manufactured in a class 1,000 clean room.

RoHS, FDA, Halal Certificated

Each PLTC series filter cartridge is produced with a continuous rigid center core which enhances structural strength of cartridge.

The cartridges are all polypropylene construction which provides wide chemical compatibility.

PLTC series filters utilize proprietary filter media with fixed pore construction to deliver highly consistent performance and resist dirt unloading at maximum differential pressure.

RoHS, FDA, Halal Certificated