Pleated-Flow CA Series
Each PLTCA series filter cartridge is produced with a continuous rigid center core which enhances structural strength of cartridge.
The cartridges are all polypropylene construction which provides wide chemical compatibility.
PLTCA series filters utilize proprietary filter media with fixed pore construction to deliver highly consistent performance and resist dirt unloading at maximum differential pressure.
RoHS, FDA, Halal Certificated
The cartridges are all polypropylene construction which provides wide chemical compatibility.
PLTCA series filters utilize proprietary filter media with fixed pore construction to deliver highly consistent performance and resist dirt unloading at maximum differential pressure.
RoHS, FDA, Halal Certificated
Model :
PLTCA
Materials of Construction
Filter Media: Polypropylene
Hardware: Polypropylene
Sealing: Thermal Bond
Support Material: Polypropylene
Gaskets/ O-rings: Silicone, Buna-N, EPDM, Viton, Telfon Encapsulated Viton
Operating Conditions
Maximum Operating Pressure: 75 psid (5.1 bar) @ 68°F (20°C)
40 psid (2.8 bar) @ 150°F (65°C)
Maximum Operating Temperature: 167°F (75°C)
Recommended Change Out Differential Pressure: 35 psid (2.4 bar)
RoHS, FDA, Halal Certificated
Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises.
Dimensions
Outside Diameter: 2.67" (68mm)
Lengths: 10", 20", 30", 40"
End Configuration
DOE
= Double open end
Code 3 = 222 / flat
Code 8 = 222 / Fin
Code 7 = 226 / Fin, Bayonet
Retention Ratings
0.5, 1, 2, 3, 5, 7, 12, 25, 30, 40, 70 µm Absolute
