Cartridge & Housing

  Carbon-Clean-WS Series Filter Cartridges

Carbon-Clean-WS series filter has carbon-impregnated cellulose media

that can provide lower pressure drops than conventional carbon block filter technology.

Carbon-Clean-WS series filter's carbon technology can improve the quality of potable water by removing unwanted taste, odor and color.

Also, its polypropylene components provide a wide range of options to address chemical compatibility concerns.

Materials of Construction

Filter Media: Carbon impregnated fibers protected by upstream and downstream polypropylene string wound fibers

Outer Netting: None

End Cap: None

Inner/ Outer Wrap: Polypropylene string wound fibers


Outside Diameter: 2.56'' (65mm)

Lengths: 10'', 20'', 30''

Retention Ratings


Operating Conditions

Maximum Operating Temperature: 180°F (82°C)


FDA Listed Materials

Manufactured from materials which are FDA listed for food contact applications in title 21 of the U.S. code of federal regulations.


1. The drinking water of unknown quality may require proper disinfection or pre-treatment in addition to carbon filtration.

2. Steps should be taken to prevent the filter cartridge from freezing. This may affect cartridge performance.

3. Carbon-Clean-WS series contain a very small amount of carbon fines.

    After installation, please flush the cartridge for a minimum of 5 minutes to remove all trace of carbon prior to using them in the process.

    Use the tap water to flush the cartridge for at least 20 seconds prior using for drinking water or cooking purpose.