Cartridge & Housing

    Pleated-Flow C Series Filter Cartridges

Each PLTC series filter cartridge is produced with a continuous rigid center core which enhances structural strength of cartridge.

The cartridges are all polypropylene construction which provides wide chemical compatibility.

PLTC series filters utilize proprietary filter media with fixed pore construction

to deliver highly consistent performance and resist dirt unloading at maximum differential pressure.

Besides, PLTC series filters have high surface area which provides long service life to reduce maintenance costs.

Manufactured in a class 10,000 clean room.

Flushed with 18 megohm-cm DI water (Optional).

Materials of Construction

Filter Media: Polypropylene

Hardware: Polypropylene

Sealing: Thermal Bond

Support Material: Polypropylene

Gaskets/ O-rings: Silicone, Buna-N, EPDM, Viton, Telfon Encapsulated Viton


Outside Diameter: 2.67'' (68mm)

Lengths: 10'', 20'', 30'', 40''

Retention Ratings

0.2, 0.45, 0.8, 2, 3, 5, 10, 20, 30, 40, 70 µm

Operating Conditions

Maximum Operating Pressure: 75 psid (5.1 bar) @ 68°F (20°C)

40 psid (2.8 bar) @ 150°F (65°C)

Recommended Change Out Differential Pressure: 35 psid (2.4 bar)


FDA Listed Materials

Manufactured from materials which are FDA listed for food contact applications in title 21 of the U.S. code of federal regulations.


All Pleated-Flow C filter cartridges are free of surfactants, anti-static agents, binders and adhesives.


All cartridge components meet USP-XXIII,Class V criteria.


Multiple autoclaving for 30 minutes at 250°F (121°C) under no end load conditions.

In-line steam sterilization is not recommended.
May be in-line sanitized with hot water at 180
°F (82°C) for 1 hour.

Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises.