Extra-Flow Series Filter Cartridges
Extra-Flow series filter cartridges combine the advantages of depth cartridges and traditional pleated cartridges.
This series is made of proprietary gel capturing filter media which is all polypropylene construction.
Therefore, Extra-Flow series filters deliver high efficiency performance when removing gels from liquid. Moreover,
EXA series has high surface area for high flow rate with low pressure drop to provide long service life.
Absolute rated at > 99.9% efficiency with retention.
Manufactured in a class 10,000 clean room.
Materials of Construction
Filter Media: Polypropylene Melt Blown
Cage/ Netting: Polypropylene
Sealing: Thermal Bond
Support Material: Polypropylene
Gaskets/ O-rings: Silicone, Buna-N, EPDM, Viton, Telfon Encapsulated Viton
Outside Diameter: 2.67'' (68mm)
Lengths: 10'', 20'', 30'', 40''
1, 3, 5, 10, 15, 20, 40 µm Absolute
Maximum Differential Pressure:
75 psid (5.1 bar) @ 68°F (20°C)
40 psid (2.8 bar) @ 150°F (65°C)
Maximum Operating Temperature: 180°F (82°C)
Recommended Change Out Differential Pressure: 35psid (2.4 bar)
FDA Listed Materials
Manufactured from materials which are FDA listed for food contact applications in title 21 of the U.S. code of federal regulations.
All Extra-Flow filter cartridges are free of surfactants, anti-static agents, binders and adhesives.
All cartridge components meet USP-XXIII,Class V criteria.
Multiple autoclaving for 30 minutes at 250°F (121°C) under no end load conditions.
In-line steam sterilization is not recommended.
May be in-line sanitized with hot water at 180°F (82°C) for 1 hour.
Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises.