Cartridge & Housing

    Clear-Fine Series

Clear-Fine series filter cartridges ultilize continuous fiber matrix to prevent media migration

and ensure consistent filtration performance.

Clear-Fine series filter elements are done with well surface treatment to eliminate any possibilities of fiber release.

They are made with proprietary center core to enhance mechenical strength of cartridge.

In addition, each Clear-Fine series cartridge is thermal bonded with foam PE gaskets for better sealing.

Besides, Clear-Fine series filters are free of surfactants, so the elements will not contaminate the liquid.

Materials of Construction

Filter Media: Depth Spun Polypropylene

Center Core: Polypropylene, Reinforced Polypropylene

End Caps: Polypropylene

Extended Core: Polypropylene

Gaskets: Polyethylene Foam

O-Rings: Silicone, Buna-N, EPDM, Viton


Outside Diameter: 2.5'' (63mm)

Inside Diameter: 1.1'' (28mm)

Lengths: 10'', 20'', 30'', 40''

Retention Ratings: 0.5, 1, 3, 5, 10, 20, 25, 30, 50, 75 µm

Operating Conditions

Maximum Differential Temperature: 158°F (70°C) with polypropylene core

194°F (90°C) with reinforced polypropylene core

Recommended Change Out Differential Pressure: 35psid (2.4 bar)



FDA Listed Materials

Manufactured from materials which are FDA listed for food contact applications in title 21 of the U.S. code of federal regulations.


All Clear-Fine filter cartridges are free of surfactants, anti-static agents, binders and adhesives.


All cartridge components meet USP-XXIII, Class V Criteria.

Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises.